1. Set up warning words
The construction passenger elevator has simple structure, reliable quality, convenient installation and operation, and can be reused. It is welded by rectangular tube, expanded metal mesh and steel plate. The solder joints are firm, the surface is sprayed with yellow or red paint, and the bottom is sprayed with black, yellow or red and white skirting boards, which makes the scene clear. The protective door shall be constructed strictly according to the drawings, the scale is correct, and the workmanship is detailed to achieve the purpose of construction safety protection.
2. The first safety net protection
The first safety net of the elevator shaft must be set up on the positive and negative zero floors. On the upper part of every two floors, most of the safety nets are designed every 10m. The method must be checked in accordance with relevant rules. The elevator installed in the safety flat net is disassembled, and the operator should wear the seat belt according to the rules. On the floor and roof, the protective railings should be installed around the holes, and a safety flat net should be installed at the bottom.
