Daily maintenance:
1. The traction machine of the sightseeing elevator needs oil lubrication. There are two scales on the outer cover of the traction machine. Open the oil nozzle to check that the oil should be in the middle of the two scales. If the oil is lower than the scale below, it means that the traction machine should be refueled. The operation will not be well lubricated, which will lead to the burning of the traction machine and motor of the sightseeing elevator. When the sightseeing elevator runs for a long time, the oil should be replaced in time to keep the traction machine clean and well lubricated.
2. Cleaning and lubricating the guide shoes of the sightseeing elevator car. Everyone knows that the guide shoes run on the guide rails, and there is an oil cup on the guide shoes. To prevent the observation elevator from generating frictional noise during operation, it is necessary to regularly refuel the oil cup and clean the guide shoes, and the car should be cleaned.
3. Maintenance of the hall door and car door of the sightseeing elevator. The failures of the sightseeing elevator are usually on the lobby door and car door of the sightseeing elevator, so attention should be paid to the maintenance of the lobby door and car door. One is to refuel at the refueling place on the upper sill of the door and keep it well lubricated, so that the sightseeing elevator will not make unpleasant noises during operation and when the door is opened. Pay attention to the inspection of the safety touch panel of the sightseeing elevator or the touch panel switch line of the light curtain type. Because the frequency of opening and closing the door of the sightseeing elevator is high, the switch line will be damaged. This requires maintenance personnel to check every time. The ones that should be changed should be changed in advance, so that users should not doubt the quality of the sightseeing elevator products due to door problems.
