Environmental characteristics of escalators: People running on escalators are concentrated, which is easy to produce garbage and pollution. The cleaning of escalators should choose the time period when the passenger flow is small or the escalator stops running.
Therefore, in addition to daily cleaning of the escalator, meticulous cleaning should be arranged at night. The oil stains, chewing gum and cigarette butts on the escalator gaps must be removed in time. Metal surfaces and glass walls should be wiped carefully. Handprints and dirt should be wiped off the handrails. The light boxes should be inspected and damaged tubes or bulbs should be replaced. Use escalators to transport tables and chairs, large items or large boxes, etc., to avoid damage to the escalator.
01
Daily cleaning service content of escalator
1. The front step of the escalator;
2. Escalator steps;
3. Rubber handrails;
4. Side baffles and skirts of escalators.
02
Escalator cleaning and maintenance standards
1. The escalator steps are free of dust and stains;
2. The stainless steel surface has no dust, no stains, and is bright and clean;
3. The glass has no fingerprints and stains.
03
Material preparation
Brooms, floor mops, rags, dry towels, buckets, elevator cleaners, stainless steel maintenance fluids, etc.
04
Cleaning frequency
1. The cleaning of the escalator should be arranged at noon or evening with a small flow of people.
2.-Generally clean once a day, and carry out daily cleaning tours. The number of daily cleaning visits can be determined according to the size of the flow of people and the requirements of specific standards.
05
Cleaning method
Under the normal operation of the automatic step ladder, use a clamp to pick up the garbage on the pedal and step ladder, and use a dry rag to clean the dust on the handrail along the direction of rotation of the handrail.
06
Cleaning procedure
In the cleaning process, generally follow the principle of going from top to bottom in sequence, that is, proceed in the order from the upper pedal to the step ladder to the lower pedal, and the handrail first, then the step ladder.
1. Prepare the necessary tools and utensils.
2. Notify the elevator operator to turn off the escalator and cut off the power supply.
3. Place a "pause-in-use" sign in front of the upper and lower pedals.
4. From the upper pedal to the step ladder to the lower pedal, use a broom to clean up the rubbish.
5. Wipe clean the handrails and the side guards.
6. Divide the handrail into several sections (each section is about 2m), spray a little detergent on glass, stainless steel and leather products, and then classify them. Wipe them with a wet cloth first, then wipe them with a wet cloth, and finally Wipe off water marks with a dry cloth.
7. Divide the pedals and step ladders into several sections (each section is about 4m), soak the mop in a bucket that has been prepared with detergent, pick it up and wring it out, mop the pedals and step ladders, and then immerse the mop Pick up another bucket of clean water, wring it out forcefully, and repeatedly wipe the pedals and step ladders.
07
Precautions
1. It is advisable to screw the water of the mop until it does not drip to prevent water from infiltrating into the machine compartment, causing the motor to be damp and the parts to be damaged.
2. After the cleaning operation is completed, you should look around the entire automatic step ladder to check if there are any omissions and incomplete cleaning, if any, you should make up in time.
3. Put away the "suspended use" sign and notify the elevator operator to restart the escalator.
4. According to the material used in the escalator, select the corresponding cleaning agent.
